rohs peak reflow temperature rating: 245c quad transformers in smt package supports two t1/e1 ports available in transmit and/or receive configurations models matched to leading quad, dual t1/e1/ cept transceivers ul recognized isolation voltage: 1500 vrms 1 28 26 57 27 10 19 17 18 13 12 14 16 32 30 31 23 21 22 dimensions: inches mm unless otherwise specified, all tolerances are .010 0,25 mechanical schematic yb weight . . . . . . . . . . . . . . .2.7 grams tape & reel . . . . . . . . . . . . 200/reel tube . . . . . . . . . . . . . . . . . . .20/tube www.pulseeng.com 1 t615.b (6/09) electrical specifications @ 25c ? operating temperature 0c to 70c part number turns ratio a, b (pri:sec 2%) ocl @ 25c (mh min) l l (h max) c w/w (pf max) dcr pri (max) dcr sec (max) package/ schematic d primary pins t1001nl c 1:1.36 / 1 1.2 0.40 30 0.7 1.0 yb/1 1-3, 5-7, 10-12, 14-16 t1006nl 1:2ct 1.2 0.35 30 0.6 1.0 yb/1 1-3, 5-7, 10-12, 14-16 t1007nl 1:1.15ct 1.2 0.70 23 0.6 0.8 yb/1 1-3, 5-7, 10-12, 14-16 t1009nl 1:1.265 / 1 1.2 0.80 35 0.6 0.8 yb/1 1-3, 5-7, 10-12, 14-16 usa 858 674 8100 ? germany 49 7032 7806 0 ? singapore 65 6287 8998 ? shanghai 86 21 32181071 ? china 86 755 33966678 ? taiwan 886 3 4643715 a. ocl (primary inductance) and l l (leakage inductance) are measured at the primary winding. turns ratio is specified primary: secondary ( ct = center tap). b. to make a 1:1 ratio from a 1:2ct ratio, use one-half of the secondary (2ct) winding. c. dual ratio transformers ? these transformers have tapped secondary windings to provide two turns ratios (t/r). use entire primary winding and connect secondary pins listed below to obtain desired turns ratio: part number turns ratio 1 secondary pins turns ratio 2 secondary pins t1001nl 1:1 31-32, 27-28, 22-23, 18-19 1:1.36 30-32, 26-28, 21-23, 17-19 d. standard packaging is anti-static tubes. optional tape & reel packaging can be ordered by adding a ?t? suffix to the part number, (i.e. t006nl t ). t3/ds3/e3/sts -1 transformers surface mount package
pulse turns ratio ocl c w/w l l dcr isolation package part number (5%) (h min) (pf max) (h max) ( max) (vrms min) high frequency common mode chokes , 4 - lines pe-65554nl 1:1:1:1 24.0 15 .20 0.30 500 through hole pe-65555nl 1:1:1:1 8.0 10 .20 0.25 500 through hole pe-65854nl 1:1:1:1 47.0 16 .20 0.30 500 surface mount pe-65857nl 1:1:1:1 24.0 15 .23 0.30 500 surface mount note: see the ?g002? (common mode choke catalog) for mechanicals and schematics. electrical specifications @ 25c ? operating temperature 0c to 70c common mode chokes for telecom applications www.pulseeng.com 2 t615.b (6/09) for more information: pulse worldwide headquarters 12220 world trade dr. san diego, ca 92128 u.s.a. www.pulseeng.com tel: 858 674 8100 fax: 858 674 8262 pulse south asia 135 joo seng rd. #03-02 pm industrial bldg. singapore 368363 tel: 65 6287 8998 fax: 65 6280 0080 pulse north asia no. 26, kao ching rd. yang mei chen taoyuan hsien taiwan r. o. c. tel: 886 3 4643715 fax: 886 3 4641911 pulse china headquarters b402, shenzhen academy of aerospace technology bldg. 10th kejinan rd. high-tech zone nanshan district shenzen, pr china 518057 tel: 86 755 33966678 fax: 86 755 33966700 pulse north china room 1503 xinyin building no. 888 yishan rd. shanghai 200233 china tel: 86 21 54643211/2 fax: 86 21 54643210 pulse europe einsteinstrasse 1 d-71083 herrenberg germany tel: 49 7032 7806 0 fax: 49 7032 7806 135 performance warranty of products offered on this data sheet is limited to the parameters specified. data is subject to change w ithout notice. other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. ? copyright, 2009. pulse engineering, inc. all rights reserved. t3/ds3/e3/sts -1 transformers surface mount package ic manufactur ic part number application transmit/ receive pulse part number ratio pins level one lxt3lxt32 t1 receive t1006nl 1:2ct (1-3) : (32-30), (5-7) : (28-26), (10-12) : (23-21), (14-16) : (19-17) e1/ cept transmit t1006nl 1:2 (1-3) : (32-30), (5-7) : (28-26), (10-12) : (23-21), (14-16) : (19-17) receive t1006nl 1:2ct (1-3) : (32-30), (5-7) : (28-26), (10-12) : (23-21), (14-16) : (19-17) vlsi vp14q575 t1 transmit t1007nl 1:1.15 (1-3) : (32-30), (5-7) : (28-26), (10-12) : (23-21), (14-16) : (19-17) receive t1006nl 1:2ct (1-3) : (32-30), (5-7) : (28-26), (10-12) : (23-21), (14-16) : (19-17) e1/ cept receive t1006nl 1:2ct (1-3) : (32-30), (5-7) : (28-26), (10-12) : (23-21), (14-16) : (19-17) at&t/lucent t7690 (5v) t1 transmit t1007nl 1:1.15 (1-3) : (32-30), (5-7) : (28-26), (10-12) : (23-21), (14-16) : (19-17) receive t1007nl 1:1.15ct (1-3) : (32-30), (5-7) : (28-26), (10-12) : (23-21), (14-16) : (19-17) exar xr-5793/5795 t1 transmit t1009nl 1:1.265 (1-3) : (32-30), (5-7) : (28-26), (10-12) : (23-21), (14- 16) : (19-17) receive t1009nl 1:1 (1-3) : (32-31), (5-7) : (28-27), (10-12) : (23-22), (14-16) : (19-18) 75 /e1 transmit t1009nl 1:1 (1-3) : (32-31), (5-7) : (28-27), (10-12) : (23-22), (14-16) : (19-18) 120 /cept transmit t1009nl 1:1.265 (1-3) : (32-30), (5-7) : (28-26), (10-12) : (23-21), (14-16) : (19-17) e1/ cept receive t1009nl 1:1 (1-3) : (32-31), (5-7) : (28-27), (10-12) : (23-22), (14-16) : (19-18)
|